- ✔️ FULLY AUTOMATIC with no pecking required, when the water level gets low the cups refill automatically.
- ✔️ EASY TO INSTALL AND CLEAN drill a 3/8" hole in the bucket and set at the correct height for your birds, or use low pressure PVC pipe.
- ✔️ RELIABLE DESIGN means less breakages and a constant supply of fresh and clean water.
- ✔️ LARGER CUP SIZE almost 3" cup diameter means these cups are suitable for all poultry.
- ✔️ LATEST DESIGN
Details: INCLUDES:5 Large Automatic Filling Water Feeder Cups Our cups refill automatically when the water level gets low to ensure a constant supply of clean, fresh water is provided to your flock. CONTAINER INSTALLATION INSTRUCTIONS Step 1. Using a 3/8" drill bit, drill a hole in the side of the container for each cup. Step 2. Remove any burrs or debris from around each drill hole. Step 3. Remove wingnut and insert cup assembly into the hole until the rubber washer contacts the outside of the container.Step 4. Hold the cup in place ensure the correct position while screwing the wingnut onto the thread inside the bucket and tighten by hand. Step 5. Thoroughly wash out the container after installation, to ensure that it is free of all residual debris. Dirt and plastic shavings may cause water cups to stop functioning correctly.Step 6. Find a location to place or hang the container so the cups are at a suitable height for your birds. LOW PRESSURE PVC PIPE INSTALLATION INSTRUCTIONS (Requires 1/8" NPT Tee Fitting) Step 1. Remove wingnut from cup assembly. Step 2. Screw cup into 1/8" NPT Fitting.
Package Dimensions: 9.1 x 7.1 x 2.0 inches